 |
|
|
|
|
FAST - DURABLE AND DEPENDABLE Insane hulls are 1st in quality, when it comes to performance. All our hulls have set World and National Championship records for NAMBA and IMPBA. All our hulls are made of polyester resin made up of matt and cloth, so are light and strong. All come in a high gloss gelcoat finish.
|
|
 |
|
|
|
Insane GX5 Hydro
|
|
46 1/2" long and 23" wide. Weight is about 8 lbs. It's made of vinylester resin with a 5" rail. The flotation in the sponsons are preinstalled when the boat is built. The motor mount is predrilled and already has T nuts installed to accommodate the Insane Quick Release Motor Mount.
|
|
Cost:
|
$ 540.00 USD PLUS SHIPPING
|
|
|
Click Photo to view larger Image
|
|
|
|
|
|
|
|
|
Insane Mono Gen 3
|
|
Features a clamshell deck designed to create no lift vs the shoebox lip. A wider cockpit which allows a 90 degree header pipe to fit. A lower rear transom was created to let the pipe sit lower in the hull.
|
|
Cost:
|
$385.00 USD PLUS SHIPPING
|
|
|
Click Photo to view larger Image
|
|
|
|
|
|
|
|
|
Insane Cat Gen 3 43”
|
|
The Insane Cat Gen 3 features an integrated radio box and comes with stuffing tube reservoir and 5" rails. Comes in all White. Colors Extra. Note: the GenIII Cat uses the standard Insane motor mounts, NOT the drop mounts.
|
|
Cost:
|
385.00 US DOLLARS PLUS SHIPPING
|
|
|
Click Photo to view larger Image
|
|
|
|
|
|
|
|
|
Insane Hydro G4 44"
|
|
The Insane Hydro G4 is insanely fast! Light weight layup, Great aerodynamics and superior hull design makes this one of the fastest boats to chase in sport hydro class. 44"L x 22"W and 8" at the transom Has the integrated radio box Polyester Resin with a glossy gel coat shine It's a sleeker design and between 5-7mph faster than the G3 Hydro in heat race trim!! Comes in all White. Colors Extra.
|
|
Cost:
|
475.00 USD PLUS SHIPPING
|
|
|
Click Photo to view larger Image
|
|
|
|
|
|
|
|
|
Insane Thunderboat 49"
|
|
49" x 25". Comes with a rear cowl with drivers cockpit The front cowl that covers motor Polyester Layup with High gloss gel coat finish w/clam shell seam 5" stringer installed The hull has a stuffing tube reservoir for easy installation The sponsons on the bottom have air slots to help with when the water gets rough.
|
|
Cost:
|
$475.00 USD PLUS SHIPPING
|
|
|
Click Photo to view larger Image
|
|
|
|
|
|
|
|
|
Insane T2 Thunderboat 49"
|
|
49" x 25". The T2 design is the most dominate in the sport. Comes with a rear cowl with drivers cockpit. The front cowl that covers motor and carburetor. Polyester Layup with High gloss gel coat finish w/clam shell seam with 5" stringer installed. The hull has a stuffing tube reservoir for easy installation. The sponsons on the bottom have air slots to help with when the water gets rough. Comes in all White. Colors Extra.
|
|
|
|
Click Photo to view larger Image
|
|
|
|
|
|
|
|
|
Insane G6 Rigger 49"
|
|
49" Long Epoxy Layup Grey Primer Only. The boat is an epoxy resin lay up and it comes in primer ready to paint. It comes with tub, cowl, 2 sponsons, solid carbon fiber boom tubes, pre mounted billet boom tube collars & spindles, turn fin & bracket (pre located), pre drilled motor mount holes for 5" quick release motor mount). The boat fully rigged weighs @13 1/2lbs.
|
|
Cost:
|
$1025.00 USD PLUS SHIPPING
|
|
|
Click Photo to view larger Image
|
|
|
|
|
|
|
|
|
. . . . . Other Products . . . . .
|
|
AB Marine Hulls
|
Insane Hulls
|
Engines
|
Hardware
|
Pipes & Headers
|
|
|
|
|
|
|
|
Click image to view
|
Click image to view
|
Click image to view
|
Click image to view
|
Click image to view
|
|
|
|
|
|
|
